Brand: Maggi Group - Italy
Product Code: CA44CERT12
Availability: In Stock
Ex Tax: NZ$0.00

The AQUA4CERT same as the 12mm AQUA4 Anchor chain but it’s a fully Certified version that comes complete with many pages of testing, material composition and more, including a real cool hologram.

The AQUA4 is fine for most people but if you are in Survey or just like that little bit extra this AQUA4CERT is the one for you.

This AQUA4 and AQUA4CERT chain are the strongest 12mm anchor chains available in NZ bar the AQUA7 range and trhe Grade 50 stainbless steel version. The AQUA4 and AQUA4CERT 12mm are 33% stronger than any other 12mm anchor chain and almost 50% stronger than many chinese made chains.

This chain is built to the EN818-3 specifications meaning it exceeds the ISO4565 Specifications. 12mm DIN766 chain does not exist in the Specification.

Note the Working loads will be different than published in the US as they use a smaller Safety Margin. By that we mean we use a larger Safety Margin, as per the world industry standard, which means the Working loads will look smaller. But any G40 chain will break at the same load no matter what Working Load is used. 

An important note: As the Maggigroup use high grade materials and processes do not apply the following numbers to any other manufacturers chain. There are many chains being called the same thing yet have loads only 50% of Maggigroup products.

Maggigroup® has been manufacturing chains since 1925 and all products undergo stringent controls, which not only involve the functional testing of individual pieces but also includes the identification and evaluation of the product in terms of the environment impact and risks to the user. These processes not only satisfy environmental requirements relating to product use but also guarantee the end user gets a top quality product, which is always the Maggigroup® prime concern.

This makes Maggigroup® chains world leaders in performance, safety and reliability.

Wire Size


 Made in  Italy
 Made by  Maggigroup

 EN818-3 and exceeds ISO4565

 Other names  HT G40, G40 High-Test, ISO
 Grade equivalent  Grade 40 (M)
 Working Load  2250 kilos
 Proof Force  45 kN
 Break Force  90 kN
 Finish  HD Galvanised
 Treatment  Zinc rich low alloy enhanced self-healing
 Pitch (P)  36mm
 Tolerance +/- 1mm per link
 Width (W)  40mm

 330 kilos per 100mts

 Tested  Fully
 Proof Loaded  Fully
 Calibrated  Fully
 Normalised  Yes
 Test Certificate  Yes
 Certified  Yes fully, comeplete with lots of paperwork
 Marking  MC IT plus the unique Certifiction number 
 Colour  Anything you like as long as it's a silver/grey
 Maximum Length   200 mts - longer available by special order

Specifications subject to change if the manufacturer so desires. But that is unlikely in our opinion.

1 kN = approx. 102 kilograms. Or 101.971621298 to be more precise.

 What the!!! do those Terms mean? Better check here for more detail then. (Will open in new window)

Write a review

Please login or register to review
Related Products