Maxwell RC6 Auto Rope Chain Winch
NZ$1,281.91
Ex Tax: NZ$1,114.70
Ex Tax: NZ$1,114.70
Maxwell's all new RC series windlasses proudly follow in the highly successful footsteps of the Freedom, Liberty and HRC fully automatic rope/chain anchor winches.
Every Maxwell automatic rope/chain windlass is available with all the necessary components for fully automatic dual direction control in a competitively priced package.
FEATURES
- The combined stainless steel and chromed bronze RC6 Series utilises 6mm or 7mm (1/4") chain spliced to 12mm 3 strand or 8 braid rope.
- The RC6 features Maxwell’s revolutionary, and patented, new Wave Design™ chainwheel.
- Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind.
- The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer .
- An inexpensive, high performance and great looking windlass; the RC6 is built for durability and years of trouble free use.
- The RC6 is a Low Profile unit (no optional capstan drum).
SPECIFICATIONS
Model | RC6 |
Maximum pull | 350kg - 770lb |
Static hold | 700kg - 1540lb |
Max recommened rope size | 12mm 8 Braid or a high quality 3 strand |
Chain size | 6 or 7mm (higher the quality all the better for longevity) |
Power | 12V or 24V 500W |
Weight | 8.5kg - 19lb |
Chain Speed at nominal working load | 24m/min - 79ft/min |
Rope Speed at nominal working load | 21m/min - 69ft/mi |
Supplied with the winch | Dual direction solenoid pack, emergency crank handle which is also the clutch release handle |
Optional Extras | Footswitch, Curcuit breaker/Isolator panel, Up/down remote panel, 8 |
MEASUREMENTS
RC6 | |
---|---|
A | 196mm |
B1 | 80mm |
C | 145mm |
D | 209mm |
E | 65mm |
F | 39mm |
Related Products
Copyright © 2019 Chains Ropes and Anchors. All Rights Reserved.